Features:
- With Mirror Projecting, Display Data is more shine and clearly: 5 different Display modes
- Safty driving, Keep your eyes ahead, No need to down your head to see Dashboard while driving
- Easy to Install, Only need connect the HUD with Car OBD port by OBD cable, HUD will display when car engine on / off
- Over-time driving Alarm, Low Voltage Alarm, Over-speed Alarm, High temperature Alarm, Fatigue driving reminder
- KMH & MPH Switch Freely.
- Compatiable for: Cars in OBD II Standard
- Installation position: On Center Console
- Connection: Connect with Car OBD port
- Display information: Speed, engine RPM,water temperature, driving distance,battery voltage....
FAQs (OBD Troubleshooting):
1.The screen without any display, and no power
Please do these operations: If OBD cable is tight enough,pull the OBD cable out several times. Try another car to test
2.When HUD power on,HUD only show the car voltage and be automatic power off after 30 seconds driving.
HUD is only available for cars with OBD2 and EOBD agreement(European:manufactured after 2003, Other region: after 2007)
HUD Products don’t support JOBD and OBDI,replace other vehicles that meet the OBD2 interface
3.Wrong operation leads to crashes
A.If your car equip with other OBD devices (parking sensor, TPMS monitor,car window closer,ELM27)
B.If your car had been modified(central control navigation,electronic throttle controller,speed cruise,refresh the computer system,One-click start-up,keyless entry,remote startup)will cause a crash,unplug other OBD devices and do the factory settings (more details please refer to the menu table)Pull out one or two wires and use HUD alone, or replace other vehicles for use.
- Inaccurate speed
In the case of power-on,long press the 'M' button in to enter into menu option,menu displays 1,parameter displays 107.Fine tuning of the values according to the difference between HUD and car instrument(Example:the instrument displays 100 KM but HUD displays 105KM,then calculation should be default value 107-5=102.Long press the 'M' button to save your adjustment and exit.
- The cars are with automatic start/stop system
After the car starts and stops automatically, the engine stops running. The HUD shuts down after 20 seconds. The turn off time can be adjusted to 180-300 seconds in Menu 11.
6.HUD can not auto power off(RPM or Speed not at O)
When HUD is power on,long press the button in to enter into menu,set the voltage from 0 to 13.2V or 13.5V(Menu 10).HUD will turn off after 3 minutes.
7.HUD will automatically restart
Indicates that the car voltage is higher than the starting voltage 13.2 volts,what you should do is to set voltage to 13.6-13.8v(Menu).HUD will automatically on when voltage is higher than 13.2v.
Specifications:
- Environment temperature -40c- + 80c
- atmospheric pressure 86-106 KPa
- Relative Humidity 10% -95%
- Environmental noise <= 60dB (A)
- Alarm sound level =30dB (A)
- Working voltage 11V~18Vdc(12Vdc/200mA)
- Sleep current <=30mA
- Product size fold 135X67X30 mm
- Full size 135x68x56mm
- Display channel LED Display
- Reflector transmittance 96%
- Virtual image distance 55 mm
- Left and right angle view 60°
- Downwards angle view 15°
Package List:
- 1* HUD
- 1* OBD Cable (7 Pin)
- 1* Non-slip Mat
- 1* Manual